Taitaa olla vain koneen nopeampaa lämpenemistä varten ts. ei pakollinen mihinkään.. tähän hätään löysin referenssiksi vain
vetteforum ja
toinen for 64
Jos kaikki reiät ynnä lämppäri ovat tukossa, pumppu voi kavitoida kiekoilla.
Quote:
In absence of this bypass, the extra hole on the passenger side of the block allows coolant to return to the water pump to circulate water in the right hand bank of the block. If it is plugged, AND there is no bypass hose from the intake manifold to the top of the water pump, AND there is no circulation through the heater core, the flow will be blocked to and from the water pump and it will cavitate when the rpm is raised. Only if there is an inlet-manifold-to-water-pump-bypass, can the lower hole in the block be plugged.
|
Bypass:n toteutus on ilmeisesti vaihdellut vuosimallin ja tehon mukaan.